61 Combination Drill Set

Material: High Speed Steel;

118 degree point angle design for general purpose;

Black oxide finish for greater resistance to wear;

Economical high speed steel bit for general drilling;

For drilling in steel, cast steel, malleable iron, sintered metal, non-ferrous metal and plastic;

Material: High Speed Steel;

135 degree split point starts on contact in all types of metal, no walking and skating;

Roll Forged, roll forged polished, Roll Forged Polished Titanium, Fully ground, Fully ground black oxide;

Harden high speed steel body provides additional safeguard;

For general using in steel, cast steel, malleable iron, sintered metal, non-ferrous metal and plastic;

OEM is available;

Size:
Diameter × Working Length × Overall Length (mm)1.0×12×344.0×43×756.5×63×10110.0×87×1331.5×18×404.2×43×757.0×69×10910.5×87×1332.0×24×494.5×47×807.5×69

×10911.0×94×1422.5×30×574.8×52×868.0×75×11711.5×94×1423.0×33×615.5×52×868.5×75×11712.0×101×1513.2×36×655.5×57×939.0×81×12512.5×101×1513.5×39

×706.0×57×939.5×81×12513.0×101×151

Type: SDS PLUS,SDS MAX,HEX;

Head Type: U Type, W Type, L Type;

Material: 40Cr, YG8C, HSS;

Hot Milled for the body:

Surface Treatment: Sand finished; Galvanized Plated; Chrome Plated; Nickel Plated; Titannium Plated; Black & White;

Tip Hardened core for extra strength and reduced breakage;

For drilling in stone, masonry, lightweight building materials and similar;

Diameter: 3 to 32mm (1/8"-1 1/4");

Size:
Dia. (inch) × Length (mm)3(1/8")×607(9/32")×15013(1/2")×15022(7/8")×1503(1/8")×1508(5/16")×12014(9/16")×15023(29/32")×1504(5/32")×758(5/16")×15015(19/32")

×15024(15/16")×1504(5/32")×1509(11/32")×12016(5/8")×15025(1")×1505(7/32")×859(11/32")×15017(5/8")×15026(1-1/32")×1505(7/32")×15010(3/8")×12018(23/32")

×15027(1-1/16")×1506(15/64")×10010(3/8")×15019(3/4")×15028(1-7/64")×1506(15/64")×15011(3/8")×12020(25/32")×15029(1-9/64")×1507(9/32")×10012(15/32")×15021(27/32")×15030(1-3/16")×150

Type: SDS PLUS,SDS MAX,HEX;

Head Type: U Type, W Type, L Type;

Material: 40Cr, YG8C, HSS;

Cold Milled for the body:

Surface Treatment: Sand finished; Galvanized Plated; Chrome Plated; Nickel Plated; Titannium Plated; Black & White;

Tip Hardened core for extra strength and reduced breakage;

For drilling in concrete, rock, stone, masonry, marble and breeze block;

Diameter: 3 to 25mm (1/8"-1");

Size:
Diameter × Length × Drilling Depth (mm)3×60×158×120×7510×200×15514×350×2954×75×208×150×10510×350×29516×150×955×85×408×200×15512×150×10516×350×2956

×100×559×110×6512×300×26518×200×1556×150×1059×200×15512×350×29518×350×2956.5×100×5510×110×6514×150×10520×350×2957

×100×5510×150×10514×300×26522×350×295      25×350×295

Material: 45# Carbon Steel;
Shank: Straight Shank;

Brad point and two shoulder cutting edges;

Right hand cutting;

Processing Technology Characteristic: Roll Forged Drills;

Designed to drill: hard and soft wood,plywood and particle boards and chipboard;

Black Flute And Bright Land

Dia.: 3mm-12mm; Length: 60mm-600 mm;

Material: Forged in one piece from High carbon steel;

Hardness of cutting point and blade is above 50HRC;

Shank: Straight Shank;

Fast drilling of big diameters, suitable for drilling in natural hard and soft wood, chipboard, laminated board, plywood, plaster, plastic, etc.

Surface finished: Bright finished, black oxide, tin oxide, black flute & bright shank;

Size: 6mm - 40mm (1/4"-19/16");
Length: 152mm - 400mm (6"-16");

Head Type: European Type; American Type;

Material: high carbon steel with thread tip;

Suitable for precise drilling in soft and hard wood, large section beam, chipboard and plywood;

Surface finished: Bright finished, black oxide, tin oxide, black flute & bright shank;

Hex shank: prevents spinning in drill chuck;

Screw threaded center point: for precisely locating the bit and for fast self-starting of the hole;

Size: Metric System: (mm) Diameter 6, 8, 10, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 34, 35, 36, 38, 40 Length 200mm, 230mm, 460mm British System: (inch) Diameter 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 7/8", 15/16", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2" Length 8", 9", 18"

Type: SDS PLUS;

Head Type: U Type, W Type, L Type; HEX Shank

Material: 40Cr, YG8C, HSS;

Surface Treatment: Sand finished; Galvanized Plated; Chrome Plated; Nickel Plated; Titannium Plated; Black & White;

Tip Hardened core for extra strength and reduced breakage;

For drilling in stone, masonry, lightweight building materials and similar;

Diameter×Length: 5×110mm - 30×1000mm;

Type: Saw Drill Bit;

135 degree splint point;

Material: HSS;

Surface Treatment: Titanium Coated, Bright;

Flute: straight flute or spiral flute;

Multi functions bit drills, saws, and reams brass, aluminum, wood and plastic;

Cross or ground cutting edges for rapid, non clog cutting;

Fits any electric drill or drill press. Cuts own starting hole and any sharp in any direction tool is moved;

For milling any type of contour in thin-walled materials. Suitable for metal, wood;

SizeSizeFlute(mm)Overall Length(mm)1/8"3.035615/32"4.048753/16"5.053857/32"6.056871/4"6.556875/16"<span style="li