Blade Thickness: 0.7mm 0.8mm 0.9mm 1.0mm according to your requirements;
Size: Size: long:6" wide:3" hight:1/2";
OEM orders are welcome;
Plaster Scraper Specification:
Type: Plaster Scraper;
Material: stainless steel / carbon steel blade;
Handle: wooden/plastic/TPR/rubber-plastic handle;
Finish: fine polish / mirror-polished;
Blade thickness: 0.6mm,0.7mm,0.8mm,0.9mm,1.0mm,1.1mm,1.2mm according to your requirements;
Blade Size: 1", 1.5", 2", 3", 4", 5", 6";
OEM orders are welcome;
Corner Clamp Specification:
Type: Corner Clamp;
Use description: Corner clamps ease the assembly, and glue-up, of almost any project with parts joining at 90° if those parts are each under 3" wide. The clamp is also useful for correcting slight off-angle miters, as there's space for a saw blade to take a bit off each side of the assembled, but unglued, joint. Used with an accurate square, the Pony corner clamp can give the tightest miter joints possible.
Material: aluminium alloy / carbon steel blade;
Finish: Galvanized; painted with specific color as clients' request;
Jaw width: 80mm;
Jaw opening: 75mm / 3";
Angle: 90 degree;
OEM orders are welcome;
Adjustable Clamp Specification:
Type: Adjustable Clamp;
Use description: These die cast aluminum clamping devices feature steel screws and handles. The Corner and Splicing Clamp adjusts from 0° to 180°, and can be used for making all types of frames. Clamps hold work up to 3" (75 mm) wide and leave miter or butt joints fully exposed for miter correction or sawing, splicing, doweling, gluing, or nailing. Countersunk holes permit clamps to be mounted on a benchtop.
Material: aluminium alloy / carbon steel blade;
Finish: Galvanized; painted with specific color as clients' request;
Jaw width: 65mm;
Jaw opening: 75mm / 3";
Angle: 45-180 degree;
OEM orders are welcome;
Adjustable Long Steel Tape Corner Clamp Specification:
Type: Adjustable Long Steel Tape Corner Clamp;
Use description: This clamps can hold any shape of working object with its zinc-made corner & hardened steel band for gluing, nailing or screwing. This handy clamp has powerful holding capacity, especially to any square shape such as photo frame, four chair-legs. 4 Aluminium jaws on a roll of steel tape extendable to 7m make the clamping of frames and odd-shaped bodies quite simple and secure. It can be used to glue drawers, bodies, etc. Removing two of the jaws makes it possible to clamp semicircular frames - of doors and window, for instance. The long steel tape enables objects with a circumference of nearly 7m. It is also possible to brace picture frames which have mitred corners.
Material: carbon steel blade;
Finish: Galvanized; painted with specific color as clients' request;
OEM orders are welcome;
Pipe Clamp Specification:
Type: Pipe Clamp;
Use description: When you need to exert bone-crushing pressure or securely hold very large projects, make your own clamps from pipe-clamp fixtures and standard black iron or galvanized pipe. Take the stationary headstock fixture and thread it onto the end of the pipe. Then slide the adjustable tailstock fixture onto the opposite pipe end. Clamping capacity is limited only by the length of the pipe. And you can use couplings to join lengths of pipe, so you can make clamps of virtually any length.
Material: carbon steel;
Surface treatment: painted as clients request;
OEM orders are welcome;
Spring Clamp Specification:
Type: spring clamp;
Material: Black PA6 (70% nylon and 30% fiber glass) body, orange PE jaw pads;
These clamps have the strongest clamp pressure that we have seen in small spring clamps;
It's good for indoor, outdoor, hobby, camping, woodworking applications, shop and hundreds of other uses;
